AquaStar Loxone, Operation Manual

Page: 18 / 20

www.praherplastics.com 18
Troubleshooting
19

The drive rotates continually without approaching a position
o
Device was operated without a respective valve

Please return for repair; damage has already occurred in this case

The drive continually triggers the backwash cycle
o
The system contains pressure boosting components (e.g., Solar absorbers)

Set the pressure sensor in such a way that the Loxone Aquastar Air does
not trip even at increased pressure

The pump fails to switch on or off
o
Relay is burnt-out

The maximum pump current of 8A was exceeded
o
The pump is not properly connected

The pump must always be looped via contacts 13-14

The disk is not lifting freely, or the drive is not running smoothly, or flow noises
can be heard
o
The pump does not switch off when the valve retainer is lifted

The pump must always be looped via contacts 13-14
o
The drop from the water surface to the valve is too great

Make sure that the total water column does not exceed 3m.
o
The V6 valve is soiled or clogged by debris

Clean the valve and use a pre-filter