Component Checklist
SETUP AND PAIRING
NOTE:
Ensure the bluetooth wireless speaker is connected to the power supply and turned on.
3.
The Bluetooth speaker
is now connected to your
device ready to play your
Music
1.
Open the setting menu
and select Bluetooth
Settings
Bluetooth
Bluetooth
Location accuracy and nearby services are improved
when Bluetooth is turned on.
15:10
50%
2.
Turn on Bluetooth and
search devices
Settings
Bluetooth
Bluetooth
Now discoverable as “Tom iPhone”.
15:10
50%
DEVICES
BT Speaker
To pair an Apple Watch with your iPhone, go to the Apple
Watch app.
Settings
Bluetooth
Bluetooth
Now discoverable as “Tom iPhone”.
15:10
50%
DEVICES
BT Speaker
To pair an Apple Watch with your iPhone, go to the Apple
Watch app.
connected
Component Checklist
CONNECTING BLUETOOTH DEVICES
You can use your Bluetooth Ceiling Speaker with any Bluetooth enabled device including laptops, tablets,
and smart phones. Follow the steps below to use the Bluetooth connection:
FIRST CONNECTION:
When your Bluetooth Ceiling Speaker has been connected to DEVICE A (first
device) it will not be visible to any other device for pairing. Another DEVICE B will not be able to search or
control the speaker. DEVICE A must be disconnected before the Bluetooth Ceiling Speaker can pair to any
device other than DEVICE A. DEVICE B can be paired and operate the speaker once DEVICE A no longer is
paired.
SECOND CONNECTION:
If DEVICE A is connected and has control, DEVICE B cannot connect to the
Bluetooth Ceiling Speaker until DEVICE A disconnects, enabling DEVICE B to pair and gain control of the
speaker.
ADDITIONAL DEVICES:
Two devices can be simultaneously paired to the Bluetooth Ceiling Speaker, but
only the 1st DEVICE paired will be in control of content, sound, and operation. Any additional devices can
be paired as DEVICE A or DEVICE B disconnect.
NOTE:
If your connection to speaker is lost, the device maybe out of range (>10m).
Component Checklist
HARD WIRED RCA LINE INPUTS
RCA CONNECTION (LEFT/RIGHT) See diagram below:
The RCA Line Inputs found on your Bluetooth
Ceiling Speaker are used to provide audio signal to your speaker from devices that do not have Bluetooth
connectivity. When using the RCA Line Inputs the music and sound content may experience louder or softer
volume levels than when the Bluetooth Ceiling Speaker is operating in Bluetooth mode. This is normal and
due Bluetooth technology, connectivity, and signal strength. Bluetooth devices previously connected to the
Bluetooth Ceiling Speaker should be disconnected or shut off prior to using the RCA Line Input as the audio
source.
5
6
RCA LEFT(White)
RCA RIGHT(Red)
