Congratulations on your purchase of this Ultra
™
submersible pump.
You will find this pump ideal for use in water gardens, ponds and to
power small ornamental fountains and statuaries. These pumps are
very energy efficient, using 50% less power than conventional pumps.
They are designed to be operated fully submerged and can be
operated in line. Made with environmentally friendly materials,
they are fish safe. The pumps are fitted with a pre-filter system to
prevent clogging and wear on the impeller. The motors are epoxy
encapsulated, not oil filled.
1) Features
• Fully submersible and energy efficient
• Powers ornamental fountains and statuary
• Prefilter system built in prevents clogging
• Fish safe, environmentally friendly materials
• KEEP THIS MANUAL–DO NOT THROW AWAY!
2) Installation
2.1
If a fountain is not required, connect hose directly to the outlet adapter and secure with
hose clamp.
2.2
Place pump in pond. If fountain is in use, ensure fountain head is above water level.
2.3
Plug pump cord into grounded outlet. Ensure cable is protected — keep away from
children and garden hazards. For proper operation, ensure that inlet is filled with water.
3) Maintenance
3.1
Remove pump from electrical supply.
3.2
Wash cage in fresh, running water. Never use chemical detergents when cleaning. Handle
filter sponge material carefully.
3.3
Remove impeller, inspect and clean in running water; replace if worn or damaged.
3.4
Reassemble pump; reconnect to electrical supply.
Maintenance notes:
• Check cord periodically for sharp bends and correct.
• If pump is taken out of service, flush with fresh water and allow to drain dry prior to storage.
4) Pump Performance
2
Ultra
™
Pump
Installation & Maintenance Instructions
Fountain and Statuary Pump
3
Model
gph full open
cord Length
gph @ 2’
gph @ 5’
Max Head
thread size
Watts
350 gph
368
12’
315
158
7’
1/2”
35
500 gph
525
12’
420
263
8’
1/2”
40
750 gph
788
25’
704
525
12’
3/4”
45
1000 gph
1050
25’
945
777
15’
3/4”
50
1500 gph
1575
25’
1355
998
22’
3/4”
90
2000 gph
2100
25’
1880
1523
25’
3/4”
150
Scala/Scale
1:2
243
9,569
11
1
4,
38
0
12
8
5,
05
5
CAGE
BASE
CAGE NOSE
REAR BEARING
IMPELLER
O-RING
VOLUTE
Legenda/Legend:
-Tav. 1, ULTRA 2000;
-Tav. 2, ULTRA 1500
-Tav. 3, ULTRA 1000
-Tav. 4, ULTRA 750
-Tav. 5, ULTRA 500
-Tav. 6, ULTRA 350
Scala/Scale
1:2
243
9,569
11
1
4,
38
0
12
8
5,
05
5
CAGE
BASE
CAGE NOSE
REAR BEARING
IMPELLER
O-RING
VOLUTE
Legenda/Legend:
-Tav. 1, ULTRA 2000;
-Tav. 2, ULTRA 1500
-Tav. 3, ULTRA 1000
-Tav. 4, ULTRA 750
-Tav. 5, ULTRA 500
-Tav. 6, ULTRA 350
Figure 1
Pump 2000 GPH