manualshive.com logo in svg

AquaScape PRO-Fit, Installation Instructions & Owner'S Manual, Page: 7 / 8

Share
Download
AquaScape PRO-Fit Installation Instructions & Owner'S Manual Download Page 7

7

Aq

ua

Cl

ea

r

Connecting the Check Valve to the Pump

STEP 9

•  If you have helpers, while the 

waterfall is being constructed,  

one person could be working on 

the installation of the pump, 

check valve, filter mats, and 

overflow. 

(fig. 19 and fig. 0)

Important:

 Bring the pipe through the 

back of the skimmer before attaching 

the fittings.

•  Remove the threaded collar and 

slip the pipe adapter from the 

check valve. 

Make sure that you 

put the threaded collar on the 

pipe before you glue the fitting  

on the pipe.

•  Slide the threaded collar onto  

the flexible PVC pipe. 

•  Using the flexible PVC primer  

and glue, attach the slip pipe 

adapter to the flexible PVC pipe, 

and thread the check valve into 

the pump discharge and place  

the pump into the skimmer box.

Overflow:  

Attach bulkhead & pipe adapter. Set desired pond level from this point using a 

transit, a water level tool, or a string level. Drain water at least a few feet away from 

skimmer using a piece of 2 in. Flex PVC piping. 

Fig. 19

 Pond Overflow

The overflow  

pipe must be  

sloping away  

from the  

skimmer to  

prevent water from going into the 

skimmer during heavy rains.

Fig. 0

 Check valve assembly.

.

  Slide collar piece over PVC, then 

glue pipe end cap to PVC tubing.

3.

  Slide collar up to check valve and 

hand tighten. It’s as simple as that!

Collar  

Piece

End 

Cap

1.

  Feed flex PVC pipe through 

back of skimmer first.

WFV

Pipe 

Discharge 

Opening

Over Flow  

Opening

Pump 

Electrical  

Cord Slot

Skimmer Vault:

 Rear View

Fill up the pond with water. The 

pond should be filled just below the 

level of the overflow in the skimmer.

Fill Pond

STEP 10

Summary of Contents for PRO-Fit









Reviews:

No comments