AquaScape Pond Powerhead Instructions & Maintenance Download Page 3

aquascapeinc.com | 

 CAN (866) 766-3426 | 

 US (866) 877-6637

3

No.

Description

1.

Pond Powerhead

Contents

Safety Information

WARNING:

 Risk of electric shock – This pump 

has not been approved for use in swimming 
pool or marine areas

WARNING:

 To provide continued protection 

against risk of electric shock, connect to 
properly grounded, ground fault circuit 
interrupter (GFCI) outlets only, using the 
following guidelines:

(A)   Have a qualifi ed electrician install a properly 

grounded receptacle outlet, acceptable for outdoor 
use and protected from snow and rain.

(B)  Inspect cord before using.
(C)  Do not use extension cords.

(D)   Any wiring of pumps should be performed by a 

qualifi ed electrician to ensure code compliance and 
user safety.

(E)   Unplug pump at receptacle outlet when not in use 

or before removal from pond.

(F)   To reduce risk of electrical shock, all wiring and 

junction connections should be made per local 
codes. Requirements may vary depending on usage 
and location.

(G)   The power cable should be protected at all times to 

avoid punctures, cuts, bruises and abrasions.

(H)   Never handle power cords with wet hands.
(I)  Do not remove cord. Do not connect conduit to  

 

 pump.
(J)  Do not use power cable to lift pump.

•  Always operate the pump fully submerged. Failure to do 

so may overheat the pump and cause it to fail, voiding the 
warranty.

•  Use only in fully assembled state, paying particular 

attention to ensure that outer fi lter screen is attached to 
the pump. Failure to operate the pump without the fi lter 
screen will allow large debris to enter the pump and cause 
the pump to fail, voiding the warranty.

•  Do not wear loose clothing that may become entangled in 

the propeller or other moving parts. 

•  Keep clear of suction and discharge openings. DO NOT 

insert fi ngers into pump with power connected.

•  Do not pump hazardous materials or liquids, such as oil, 

saltwater or organic solvents.

• Do not block or restrict discharge.

•  Products returned must be cleaned, sanitized, or 

decontaminated, as necessary, prior to shipment to ensure 
that employees will not be exposed to health hazards in 
handling said material. All applicable laws and regulations 
shall apply.

IMPORTANT:

 Aquascape, Inc. is not 

responsible for losses, injury, or death 
resulting from a failure to observe these safety 
precautions, misuse or abuse of pumps or 
equipment.

•  The Pond Powerhead is a thermally protected, 

submersible pump for outdoor or indoor use and has been 
evaluated for use with water only.

1

A

A

B

B

2

2

1

1

Summary of Contents for Pond Powerhead













Reviews: