AQ1B Underwater Metal Detector User Manual
8
5.
Now slide the opposite end of the Lower Shaft inside the Arm Saver as shown
below and secure with the Nut and Bolt from the Arm Saver.
Note: There are three possible securing positions on the Arm Saver so that you can
select the one which is more comfortable for you and most suitable for the job you
are carrying out
.
6.
The top of the Arm Saver is designed to secure both your arm and an AQ1B
Module in the cups as shown below.
7.
When fully assembled the Arm Saver Kit when connected to a 38cm Loop
should look like the image below.
