1-Year Limited Warranty
WHAT IS COVERED:
This Warranty covers defects in
materials or workmanship in
manufacturing of your Aquasana
drinking or shower water filter
systems, except as provided below.
FOR HOW LONG:
This warranty runs for 365 days from
the date of purchase by a consumer
(“Warranty Period”).
WHAT IS NOT COVERED:
This warranty does not cover filter
cartridges and any products that
were not installed in compliance
with the instructions or that have
been abused or operated incorrect-
ly. It also does not cover incidental
or consequential damages caused
by a failure of the product. Finally,
this warranty is voided if the
product is used with parts that are
not genuine Aquasana parts. This
includes, but is not limited to:
replacement filters, faucets, and
diverter valves. This warranty does
not cover the RHINO Whole House
Filtration System.
WHAT AQUASANA, INC. WILL DO:
We will replace the defective part of
the covered product and send it to
you with installation instructions
upon payment of $9.50 for shipping
and handling per incident.
HOW TO GET SERVICE:
To receive service under this
Warranty, you must contact
Aquasana, Inc. at 1-866-662-6885 or
[email protected] within the
Warranty Period to describe the
problem to a customer service
representative who will verify that
the product is under warranty and
arrange for delivery of a replace-
ment part.
HOW STATE LAW APPLIES:
This warranty gives you specific
rights and you may have other
rights which vary from state to state.
Some states do not allow the
exclusion or limitation of incidental
or consequential damages, so the
above limitation or exclusion may
not apply to you.
Warranty registration information on back.
(866) 662-6885
[email protected]
www.aquasana.com
Aquasana, Inc.
6310 Midway Road
Haltom City, TX 76117
Filter is only to be used
with cold water.
Filter usage must comply
with all state and local laws.
Testing was performed under
standard laboratory conditions,
actual performance may vary.
Systems certified for cyst reduction
may be used on disinfected waters
that may contain filterable cysts.
See owner’s manual for general
installation conditions and needs
plus manufacturer’s limited warranty.
• All contaminants reduced
by this filter are listed.
• Not all contaminants listed
may be present in your
water.
• Filter does not remove all
contaminants that may be
present in tap water.
Do not use with water that is microbiologically
unsafe or of unknown water quality without adequate
disinfection before or after the system.
Organic chemicals included by surrogate testing
VOCs
(by surrogate testing using
chloroform)
Drinking water
regulatory level
(MCL/MAC) mg/L
Influent/
Unfiltered
Effluent/
Filtered
Percent
Reduction
alachlor
0.002
0.050
0.001
>98%
atrazine
0.003
0.100
0.003
>97%
benzene
0.005
0.081
0.001
>99%
carbofuran
0.04
0.190
0.001
>99%
carbon tetrachloride
0.005
0.078
0.0018
98%
chlorobenzene
0.1
0.077
0.001
>99%
chloropicrin
—
0.015
0.0002
99%
2,4-D
0.07
0.110
0.0017
98%
dibromochloropropane
(DBCP)
0.0002
0.052
0.00002
>99%
o-dichlorobenzene
0.6
0.080
0.001
>99%
p-dichlorobenzene
0.075
0.040
0.001
>98%
1,2-dichloroethane
0.005
0.088
0.0048
95%
1,1-dichloroethylene
0.007
0.083
0.001
>99%
cis-1,2-dichloroethylene
0.07
0.170
0.0005
>99%
trans-1,2-dichloroethylene
0.1
0.086
0.001
>99%
1,2-dichloropropane
0.005
0.080
0.001
>99%
cis-1,3-dichloropropylene
—
0.079
0.001
>99%
dinoseb
0.007
0.170
0.0002
99%
endrin
0.002
0.053
0.00059
99%
ethylbenzene
0.7
0.088
0.001
>99%
ethylene dibromide (EDB)
0.00005
0.044
0.00002
>99%
haloacetonitriles (HAN)
Bromochloroacetontrile
—
0.022
0.0005
98%
Dibromoacetontrile
—
0.024
0.0006
98%
Dichloroacetontrile
—
0.0096
0.0002
98%
Trichloroacetontrile
—
0.015
0.0003
98%
haloketones (HK)
1,1-dichloro-2-propanone
—
0.0072
0.0001
99%
1,1,1-trichloro-2-propanone
—
0.0082
0.0003
96%
heptachlor (H-34, Heptox)
0.0004
0.025
0.00001
>99%
heptachlor epoxide
0.0002
0.0107
0.0002
98%
hexachlorobutadiene
—
0.044
0.001
>98%
hexachlorocyclopentadiene 0.05
0.060
0.000002 >99%
lindane
0.0002
0.055
0.00001
>99%
methoxychlor
0.04
0.050
0.0001
>99%
pentachlorophenol
0.001
0.096
0.001
>99%
simazine
0.004
0.120
0.004
>97%
styrene
0.1
0.150
0.0005
>99%
1,1,2,2-tetrachloroethane
—
0.081
0.001
>99%
tetrachloroethylene
0.005
0.081
0.001
>99%
toluene
1
0.078
0.001
>99%
2,4,5-TP (silvex)
0.05
0.270
0.0016
99%
tribromoacetic acid
—
0.042
0.001
>98%
1,2,4-trichlorobenzene
0.07
0.160
0.0005
>99%
1,1,1-trichloroethane
0.2
0.084
0.0046
95%
1,1,2-trichloroethane
0.005
0.150
0.0005
>99%
trichloroethylene
0.005
0.180
0.0010
>99%
Trihalomethanes (THMs)
Influent/
Unfiltered
Effluent/
Filtered
Percent
Reduction
Bromodichloromethane
(THM)
0.080
0.300
0.015
95%
Bromoform (THM)
Chloroform (THM)
Chlorodibromomethane
(THM)
Xylenes (total)
10
0.070
0.001
>99%
NSF/ANSI 42
Minimum
reduction
Overall %
reduction
Results
Chlorine Reduction, Free Available
<0.5 mg/l
97.66%
Pass
Chloramine Reduction, Free Available
<0.5 mg/l
97.66%
Pass
Particulate Reduction
85%
99.9%
Pass
NSF/ANSI 53
Required
reduction
Overall %
reduction
Results
Cyst Live Cryptosporidium & Giardia
99.95%
>99.99%
Pass
Mercury Reduction pH 8.5
<2 ug/L
>95.8%
Pass
Mercury Reduction pH 6.5
<2 ug/L
>96.5%
Pass
Lead Reduction pH 6.5
<10 ug/L
>99.4%
Pass
Lead Reduction pH 8.5
<10 ug/L
>99.3%
Pass
MTBE Reduction
<5 ug/L
86.6%
Pass
Turbidity
<0.5 NTU
98.9%
Pass
VOC Surrogate Test
95%
99.4%
Pass
Asbestos Reduction
99%
>99%
Pass
NSF/ANSI 401
Maximum
Concentration
Minimum
Reduction
Overall %
Reduction
Results
Phenytoin
30 ng/L
95.50%
95.6%
Pass
Ibuprofen
60 ng/L
95.3%
95.4%
Pass
Naproxen
20 ng/L
96.3%
96.4%
Pass
Estrone
20 ng/L
96.30%
96.5%
Pass
Bisphenol A
300 ng/L
98.80%
98.9%
Pass
Nonyl phenol
200 ng/L
97.50%
97.5%
Pass
NSF P473
Influent
challenge
concentration
Maximum
permissible
product water
concentration
Overall %
reduction
Results
Perfluorooctanoic acid (PFOA) &
Perfluorooctane sulfonate (PFOS)
1.5 ±10% ug/L 0.07 ug/L
96%
Pass
Performance Data for the Aquasana Under Counter Water Filter
Model
Replaces
Operating pressure range
Rated capacity Operating temp range
Rated flow
AQ-5300+ AQ-5300+R
20-80 psi (1.40-5.624 kg/cm
2
)
800 gallons
(3,028 liters)
40-90° F (4.44-32.2° C) 0.72 gpm
(2.7 lpm)
Manufactured by: Aquasana, Inc.
6310 Midway Road · Haltom City, Texas 76117 · 866.662.6885
System tested and certified by NSF International against
NSF/ANSI Standard 42, 53 & 401 and conforms to NSF
protocol P473 for reduction of claims specified on the
Performance Data Sheet and at www.nsf.org.
Testing Performed under NSF/ANSI Standards 42 and 53 and in accordance with the California Department of Health Services Drinking Water Treatment Device Program.
This system has been tested according to NSF/ANSI 42, 53, 401 & P473 for reduction of the substances listed below. The concentration of the indicated substances in water
entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42, 53, 401 & P473.