INTRODUCTION
Thank you for purchasing the
Aquarius Direct AD18(s) filter.
This product has been designed and
manufactured to the very highest quality
standards. Correctly installed and
properly maintained in accordance with
the following instructions, it will provide
you with many years of reliable service.
This guide explains how to install a new
Aquarius Direct AD18(s) filter.
DO NOT ATTEMPT TO INSTALL THIS
PRODUCT WITHOUT REFERENCE
TO THIS GUIDE. FOR THE PRODUCT
TO FUNCTION CORRECTLY IT
MUST BE INSTALLED STRICTLY
IN ACCORDANCE WITH THESE
INSTRUCTIONS.
PARTICULAR ATTENTION MUST
BE PAID TO ENSURING THE WATER
PRESSURE, WATER FLOW ARE
WITHIN THE STATED PARAMETERS.
THE MANUFACTURER RESERVES
THE RIGHT TO RECOVER ANY COSTS
INCURRED AS A CONSEQUENCE OF
INCORRECT INSTALLATION.
The Aquarius Direct AD18(s) filter
comprises of multiple items which are
listed in section titled package contents.
The Aquarius Direct AD18(s) filter
must be installed using only the genuine
supplied items.
Substituting any of them with other
manufacturers’ alternatives or failing
to install and maintain the filter in strict
accordance with these instructions will
invalidate your product warranties.
Aquarius Direct will not accept liability
for damage or accidents resulting from
the use of non-genuine components,
incorrect installation or operation.
Study the diagrams, read this guide
and plan the layout carefully before
proceeding.
Caution
The water supply pressure must be
between minimum 1.5 Bar (22 psi) to
a maximum 5.5 Bar (80 psi) to operate
correctly, any deviation higher or lower
from the stated minimum or maximum
could result in damage to the Aquarius
Direct filter or injury to the end user.
Additional items required
not supplied
3 x wood screws to mount filter head
1 x screwdriver for above screws
2 x adjustable wrenches for tightening
connections
1 x cutters (or a sharp knife) for cutting
supplied ¼ tube
