background image

1

PREFACE

Details of this Manual

This manual contains the installation and operation instructions for the Aquarii Zino (pronounced: Zee-No) to be performed by a 
qualified and trained installer. The Mounting Option detailed in this manual is:

• Slope Recessed Mount

Be sure to read this entire manual before beginning the installation procedures. DO NOT DISCARD THIS MANUAL.

Questions about this Manual?

The present material is subject to change without notice. If you have any questions or concerns regarding your Aquarii Product 
you can contact us at:

Aquarii Inc
17 Genesee Street
Camillus, NY, 13031
315-672-8807
[email protected]
aquariitech.com

CLEANING AND MAINTENANCE

All Cleaning and Maintenance procedures must be performed by a qualified individual (Electrician/Technician) or Aquarii 
Personnel. The following precautions and actions must be taken to ensure personal and product safety during all Cleaning and 
Maintenance Procedures:

• The sites power supply is disconnected/shut-off
• Wear the required Protective Eye Wear
• DO NOT TOUCH the LED Array or Optical Lenses
• The fixture is not altered or does not receive any non-authorized services. Doing so will void the Aquarii Warranty.

Fixture Safety Warnings

The following MUST BE read and adhered to before beginning any installation or mounting procedures.

• Do not connect the fixture to an electrical system that does not provide grounding equipment.
• Do not connect the fixture to a power source with a Voltage/AC level outside the fixture parameters.
• The fixture cannot be hung with supply wires or wire connectors.
• Wiring MUST NOT come into contact with any surfaces that have sharp edges to ensure personal/product safety.
• The fixture power supply MUST BE disconnected from the sites power input until instructed otherwise.
• All installation procedures must be performed by a properly trained/certified electrician.

AQUARII WARRANTY

This limited warranty is provided by Aquarii, Inc. indicated as Seller on the invoice provided to the original purchaser of the LED 
lighting Product. Seller warrants that the Product will be free of defects in material and workmanship which cause the Product 
to fail to operate in accordance with the performance specifications set forth in the documentation published for or provided 
with the Product (the “Specifications”). The determination of whether the Product is defective shall be made by Seller in its sole 
discretion with consideration given to the overall performance of the Product. 

A Product shall not be considered defective 

NOTE

The information in this manual may not be copied or distributed without the 
written consent of Aquarii, Inc. The goal of this manual is to provide basic 
information regarding the material herein. Any other use is prohibited.

Summary of Contents for RHEOS












Reviews: