AquaPur AFR 3 C2, Operating Instructions Manual

Page: 26 / 101

GB │ IE │
23 ■ AFR 3 C2
Cleaning and care
Emptying the fluff collector
1) First pull the fluff collector a little way down
and lift it off.
2) Empty out the textile fluff.
3) Replace the fluff collector
so that it is firmly in
place.
Cleaning the housing and cutting head
ATTENTION! MATERIAL DAMAGE!
Do not use abrasive, aggressive or chemical cleaning
agents. These could damage the surface of the
appliance!
♦ Clean the housing, the removed spacer and the
protective cap with a moist cloth.
♦ Unscrew the shaver foil from the appliance.
Clean the shaver foil with a slightly damp cloth.
WARNING! RISK OF INJURY!
Be careful when handling the blades under the
shaver foil
. These are very sharp and can easily
be damaged.
♦ Brush fluff and lint remnants from the cutter knives
with the cleaning brush
.
♦ When all parts are well dried, screw the shaver foil
back on.
♦ Replace the spacer so that it is seated firmly.