6
ONE | USE AND INSTALLATION GUIDE
SAFETY
INSTRUCTIONS
Installation
WARNING: To avoid a hazard due to
the instability of the appliance, it must
be fixed per instructions.
The appliance should work under an
environment of temperatures from
4°C-40°C.
The inlet water pressure should be in
the range of 1 bar (14.2 psi) to 8 bar
(116 psi).
Do not place the device close to strong
magnetic devices as it may cause fire,
product damage, or circuit fault.
Please install the device near a floor
drain.
Ambitious DIYers can independently
conduct the installation work providing
they possess the necessary skills and
experience.
Installation specialists are authorized
to conduct installation work in line with
existing regulations.
Cleaning and maintenance
If you leave the system idle for more
than three days, it is recommended
to disconnect the power and close
the inlet water ball valve. When using
the device again, flush the system for
3-5 minutes before normal use.
To flush the filter, touch the Flush
button on the front of the device. The
flushing will last 60 seconds. The
flushing will stop and be deemed
invalid if you push the Flush button
again within the 60 seconds interval.
RO
PCB
Reset
Flush
Power
