THE WATER FOUNTAIN OPERATION
6
Filter cartridges replacement:
The replaceable filter cartridges originally installed in the dispenser are right for the model.
It is recommended to replace the filter cartridges in a timely manner.
REMEMBER that a dispenser with used cartridges is unusable.
- turn off the water at the connection and open the tap
(5)
for fresh water in order to
relieve the pressure.
- pressing it hard and holding the safety button
(14)
, turn the used filter cartridge counter
clockwise (fig. 5);
- remove the protective foil from the new cartridge;
- insert the new cartridge into the cabinet
(14)
, pressing it carefully, and gently turn it
clockwise (fig. 6).
Follow the correct sequence when replacing cartridges as shown in Fig. 6.
- then follow the steps in the chapter " Following the water fountain installation and
connection".
KH cartridge regeneration
- perform the first two steps in the "Filter cartridges
replacement" section;
- then assemble the regeneration adapter
(1)
and connect it
to the KH insert (included in the set or purchased
separately) (fig. 6):
- place the washer
(3)
on the nut
(2)
;
- put the nut
(2)
with the washer
(3)
on the adapter
(1)
,
pressing it as far as it will go;
- put the plastic hose
(4)
on the stump on the adapter
(1)
;
- firmly insert the adapter
(1)
in the insert
(6)
;
- screw an ordinary clean plastic bottle
(5)
with a cut-off
bottom (funnel-shaped) onto the nut
(2)
;
Fig. 5
1
2
1
2
Fig. 6
1 - push
2 - turn
1 - insert
2 - turn
Fig. 7
