Installation
Steps
1
.
Install
Tray
Move
the
Tray
to
the
desired location
,
every
ground
foot nut should touch
the
ground
,
Use the leveling feet to level the tub. Insert
the
drain
pipe
into
the
drainage
outlet
.
Drain should be a minimum of 2 inch dia. Refer to Pic 1
2.Install Mid back
panel / Left Panel / Right Panel
(
1
)
Glue
plastic washer to every
mid
back
panel
installation
hole.
Apply
silicone continually along the installation
holes
(As
Pic2 )
Pic2
Pic1
Glue down
plastic
washer
Clear Silicone
(2) line up the mid back panel holes to bathtub holes. Use
M6x35 hexagon screws to
connect( As Pic 3) Leave all hardware loose until unit is completely assembled.
(3) Apply silicone along the mid back panel left edge. (As Pic 3)
(4)Glue
plastic washer to the left
panel
installation
hole. Apply
silicone
continually along the installation
holes . ( As Pic 2)
(5) Use M6x25 hexagon screws to connect the Left panel to mid back panel holes.
Use M6x35 hexagon screws to connect the Left panel to tray holes .(As Pic 4)
(6) Use the same method to install the Right Panel.(As Pic 5)
Pic3
Silicone
Pic4
M6x35mm
Plastic washer
Mid Back Panel
Mid Back Panel
Left-Panel
M6x35mm
Plastic washer
M6x25
Mid Back Panel
Left-Panel
Pic5
Right-Panel
4
3
