②
Assemble the handles (4c) to the sliding glass doors (Figure 7). Test the doors to see that they can be
opened and closed smoothly and quietly. (Figure 8) If not then readjust the rollers as explained in the
previous step.
(Figure 9) Connect all hoses to and from the Steam generator. The appropriate outlets/ inlets are labeled in the
above diagram and are visible in the photo below. The Steam generator drain hose is pushed onto the fitting (straight
or elbow) connected to the Steam Generator. It is secured to this fitting by a clamp and a 3/16 X 5/8 inch round head
fastener as is shown in the above figure. It is also shown assembled in the photo below.
Outside of spa
Figure 7
4c
Figure 8
Steam outlet
Steam generator
Steam drain
Inside of spa
Electrical feed
Cold water feed
connector
