- EN -
12
Product Description
Overview
A
Description
1
Filter housing
2
Outlet
3
Pump housing
4
Stepped hose adapter with flow rate regulator for connection hose
∅
19/25 mm
5
Stepped hose adapter with union nut for connection hose
∅
38/50 mm
Intended use
Only use the product described in this manual as follows:
•
For pumping normal pond water for water features and fountains.
•
Use for private purposes only.
•
Operate in accordance with instructions.
The following restrictions apply to the unit:
•
Do not use in swimming ponds.
•
Never use the unit with fluids other than water.
•
Never run the unit without water.
•
Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
•
Do not connect to the domestic water supply.
Installation and connection
Connecting the hose
How to proceed:
B, C
1. Shorten the stepped hose adapter to the diameter of the hose used if necessary.
– This reduces pressure losses.
2. Screw the stepped hose adapter to the outlet.
3. Slip the hose clip over the hose, fit the hose onto the hose connector and secure with the hose clip.
4. PP-2500/PP-5000: Setting the flow rate regulator.
Installing the unit
D
•
Never operate the pump in a swimming pond.
•
Ensure that the connection to the power supply is at least 2 m from the pond.
Place the unit horizontally on the ground ensuring its stable position.
Commissioning/start-up
N O T E
The unit will be destroyed if it is operated with a dimmer. It contains sensitive electrical components.
•
Do not connect the unit to a dimmable power supply.
Switching on:
Connect the unit to the mains. The unit switches on immediately.
Switching off:
Disconnect the unit from the mains.
