7
Program 2:
Corresponds to program 1 that was complemented by a moonlight shining constantly with 5%
power during the dark phase.
Program 3:
Same as program 2 but with 10% moonlight.
Program 4:
Same as program 3, but instead of constant moonlight a moon phase with 5%.
Program 5:
Same as program 3, but instead of constant moonlight a moon phase with 10%.
Program 6:
Same as program 2, plus cloud flying between 10:30 and 16:00 o’clock with 12 to 40% cloud
darkening.
Program 7:
Same as program 6, but with 5% moonlight.
Program 8:
Same as program 7, but with a moon phase of 5% (see Fig. 4).
Programme 9:
Without programming.
If there should be full moon on a certain day, this can only be adjusted at the clock (see chapter
3.1.1).
The programs can be changed by loading them with DimEdit, modify and then store them under
the same or a new name.
If the timer sunrise control is connected to the computer via the USB cable provided, this will
appear as separate drive.
Summary of Contents for sunrise control
Page 4: ...4 Abb 2 Grafische Darstellung der voreingestellten Lichtprogramme...
Page 5: ...5 3 1 2 Programmierung am Computer Abb 3 Programm DimEdit Verlauf Programm 8...
Page 13: ...4 Fig 2 Graphic presentation of the pre set light programs...
Page 14: ...5 3 1 2 Programming on the computer Fig 3 Program DimEdit course of program 8...
