11
Replacing a Guide
Top Track
To replace a guide the cover can be in the open or closed position.
1).
You should be able to have access to the guides
from the front opening, if not remove the top
of the bench.
2).
Remove the 3 (3/8”) nuts that secure
the guide to the threaded studs.
3).
Remove the top half of guide, then
remove the bottom half. You may
need to remove a track screw if
the track cannot be raised to release
the guide from the forward stud.
4).
Replace bottom half of guide over
forward stud, and secure nut.
5).
Make sure rope and cover are
properly seated in the bottom
half. Secure top half with the two
remaining nuts.
Under Track
1).
Take lid off the cover recess.
2).
Remove the (3) screws and 3/8” nuts that hold the guide to the guide
bracket.
3).
Remove top half of the guide.
4).
Remove bottom half of the guide.
5).
Replace the bottom with the tab in center
groove of the track, make sure rope and
cover are properly sealed in bottom half
grooves.
6).
Replace top half of the guide.
7).
Re-secure nuts and bolts as required.
Top side of Guide
Bottom side of Guide
Flush track with guide
Top track
Guide
