2016 Aqua Logic, Inc., 9558 Camino Ruiz, San Diego, CA 92126 Effective 02/09/16
Ph: 858.292.4773 FAX: 858.279.0537 email: [email protected] website: www.aqualogicinc.com
Page 3
Thank you for selecting an Aqua Logic ultraviolet (UV) sterilizer. Each model has been designed and built
to provide years of reliable service and has been fully tested under pressure before it leaves the factory.
Aqua Logic has been manufacturing UV sterilizers for nearly 15 years. Aqua Logic’s UV sterilizers are in
use by aquarists, aquaculture, public aquariums, educational institutions, government agencies, industry
and research organizations across the US and around the world.
Aqua Logic offers free technical information by telephone [858.292.4773] or by FAX [858.279.0537] M-F
8:30 am to 5:00 pm except selected holidays. Information is also available on the internet at our website
(www.aqualogicinc.com) and by email: [email protected].
The following should answer most of the questions that you may have about the installation, operation and
use of your UV sterilizer:
•
What benefits do I receive by using a UV sterilizer on my system?
Aqua Logic UV sterilizers are highly recommended for both fresh and saltwater (marine) systems as
well as ponds. They may be used to kill waterborne bacteria and viruses, to control algae and/or to kill
fungi and protozoa (parasites).
UV sterilizers do NOT affect water chemistry, lower the livestock’s immune systems, nor affect
established biological filtration systems.
•
How do I know which size UV I need to do the job?
See specification sizing chart provides maximum flow rates (in gallons per minute) to control typical
bacteria and viruses, algae, and fungus/protozoa.
•
How many hours per day should I use a UV on my system?
We recommend that the UV sterilizer be placed in continuous operation for 24-hours-per-day 7-days-
per-week after the biological filtration systems are established (typically about 4 weeks after starting or
restarting a system).
•
How often should I change the lamp?
The average life expectancy of lamps in Aqua Logic UV sterilizers is almost a year of continuous
operation. Even though the lamp may still be glowing with blue light after these time periods, the lamp
probably no longer produces the kill-rate you desire.
•
What are the maximum pressures that I can use on Aqua Logic UV sterilizers?
All models may be used in applications up to a maximum of 35 psi.
•
Where should I put the UV sterilizer in my system?
The UV sterilizer should be the last piece of equipment in your system before the water is returned to
the tank.
•
How do I connect the water inlet and outlet?
WARNING
:
Never use Aqua Logic UV sterilizers on systems which are connected to municipal water
systems since the available pressure may exceed the maximum ratings of the equipment and serious
damage or injury may result.
