self-priming pump
for swimming pool
MONOPHASIC
ASPIRE
ELECTRICAL INSTALLATION
It is essential that you use a multiple
disconnection device with a space of at least
3 mm between surfaces to disconnect the
equipment from the electrical current
The equipment should be connected to an
alternating current supply (see data on
the pump’s plate) with earth connection,
protected by a residual current device (RCD)
having a rated residual operating current not
exceeding 30 mA.
Adjust the value of the thermal relay
appropriately depending on the pump
current.
Check the correct layout and connection of
the earthing cable in the equipment.
Respect the electrical installation and
connection conditions. Failure to do so may
lead to the pump manufacturer declining all
responsibility and rendering the guarantee
null and void.
Special regulations may exist for the
installation.
Unsuitable mains connections involve the
risk of electrocution.
The mains cable may only be connected
by skilled, authorised personnel .
