background image

Aquarian Thermo 

installation instuctions

page 15

Shower operation

1 Turn the on/off knob fully into the open position to turn the shower on. 

N.B. The on/off MUST NOT be used as a method of flow control.

2 Rotate the temperature control lever to select a comfortable showering temperature using the

temperature markings as a guide. Turn the on/off knob fully into the closed position after use.

After installation

Run through the Aquarian Thermo operation with the purchaser and hand them this guide.

Complete and post the Aquarian Thermo guarantee card or register online at www.aqualisa.co.uk.

Cleaning

Your Aquarian Thermo shower valve should be cleaned using only a soft cloth and washing up liquid.

DO NOT USE ABRASIVE CLEANERS.

Cleaning the filters

As this condition is not covered by our standard warranty terms, it is suggested that the cartridge be removed and the filters checked

by a competent person. In the event of any difficulties please contact the Aqualisa customer helpline for assistance.

1. Turn off the supplies to the shower and carefully remove the shrouds as detailed overleaf.

2. Remove the cartridge as detailed overleaf.

3. Carefully ease the inlet filters from their housings by rotating them a quarter turn anti-clockwise. 

4. Backwash the filters under a running tap or using a mild solution of vegetable based descalent if required.

5. Refit the filters into the inlet ports and carefully replace the cartridge ensuring the hot and cold markings are uppermost.

6. Refit the shrouds as detailed overleaf.

User Guide

1

2

Summary of Contents for Aquarian Thermo




















Reviews: