6
No adjustable TAP
Cutting
16mm
17.5mm
19mm
Attention!!
Please put on gloves.
!
※When the hose to be shorten
A
B
●The diameter of the round tap
more than 24mm or 10mm
without foam water fitting.
●A tap with shower
●With sensor
Wrench the 2 nuts at
the side of the body.
hose nuts
Take off the nuts from
the body
Take of the hose cut
them to the apt length.
●A tap which cannot detachable
●A tap which differs from our
diameter of the diameter.
●A special type of the tap
measuring paper
D
The other water tap
Put off the 4 screws
and insert it from the
bottom of the ring screw.
Temporary
Stoppage Valve
with 4 screw.
Tighten the screws.
Clamp the ring screw to
the tip of the S pipe.
1
2
3
4
5
Take off the ring
screw from the S
pipe.
A
16mm
Round
water tap
Measure the diameter
of the tap with the
measuring paper.
Move the ring screw
backward.
Attach the adapter.
Move and clamp the ring
screw to the tip of the S pipe.
Pick up the
appropriate adapter.
1
2
3
4
5
①
②
①
②
③
Clamp the ring screw to the tip of the S pipe.
B
Foam water
water tap
(For External thread)
Take off the foam
water fitting.
Put off the ring screw from
the S pipe attach the it with
a the adapter to the tap.
S pipe
ring screw
(Please use the
spiral spring.)
1
2
3
ring screw
W
22
×
山20
C
W23×山20
Foam water
water tap
(For Internal thread)
Take off the foam
water fitting.
Put off the ring screw from the
S pipe attach the it with a the
adapter to the tap.
Clamp the ring screw to the tip of the S pipe.
(Please use the
spiral spring.)
1
2
3
ring screw
S pipe
ring screw