6
User Manual S200 WCS
Update August 2021
1 General information
1.1 General overv iew
This technical manual contains instructions for installing, commissioning, maintaining and
repairing the S200 WCS measurement and monitoring device.
Please follow the safety instructions and notes in bold print at all times!
1.2 Notes in bold print
Titles in bold print, alerts and warnings have the following meaning, in this technical
manual:
Important:
This alert is used in the event of non-compliance with functional or operating
instructions, or
when the recommended procedures or misinterpretation of these
instructions may cause an accident or injury.
Warning:
This entry is used in the event of non-compliance with functional or operating
instructions, or
when the recommended procedures or misinterpretation of these
instructions may damage the equipment.
Note:
This section is used to highlight key points.
1.3 Warra nty
The manufacturer shall ensure the operational safety and reliability of the system when, and
only when, the following conditions have been met:
- Installation, connection, adjustment, maintenance and repairs are carried out exclusively
by qualified and authorized expert staff.
- Only original spare parts are used for repairs.
- The measuring and monitoring device shall be used in accordance with the information
and instructions set out in this manual.
Warning:
The warranty shall not apply if the device is not used as intended.
Note:
Wear parts are not under warranty (see table at end of manual).
