35
User manual S200 WCS
Update August 2021
/Basic settings/Control param./Setting control.1/
Use the
key to select the desired measuring value allocation.
If a parameter is not used, select the reading assignment
“No measurement”..
For additional control settings, see chapter
“Controller settings".
7 . 2 . 3 D i re c t i o n o f c o n t ro l a c t i o n
Basic settings/Control param./Setting control.1/
The direction of the controller action is be determined with the setting
“Control direction”. For
example,
“Reduce” means that the controller is running when the reading exceeds the
adjusted set point. As a result, the reading is going down (lower value).
7 . 2 . 4 Ass i g n m e nt o f th e c on tro l o utp ut
The output signal of the controller can be assigned to various actuators (relays, etc.).
/Basic settings/Control param./Setting control.1/
The output signal of the controller is assigned with the
key, e.g. relay 1, relay 2, digital
output 1, digital output 2, analog output 1 or analog output 2.
7 . 2 . 5 Pu l s e fre q ue nc y
/Basic settings/Control param./Setting control.1/
