LOG-AQUA
- 8 -
PROTECTION DU LOGGER
After connecting sensors and antenna, place the LOG-AQUA protector above
the connector ports and secure the Wavelet protector into the LOG-AQUA
enclosure.
Upper Clips
Lower Clips
Protector Arches
a.
Insert the two lower clips into the two lower holes of the LOG-AQUA
enclosure.
b.
Snap the upper clips into place in the two grooves above the panel
connector
a
b
CAUTION: The protector is provided to shield the connector from
tampering or over-exposure that could result in disconnected wiring.
If you need to remove the protector, grasp it at the protector arches and
pull up. The protector will snap off.
.
