North Sports, Inc. #1 North Shore Dr, SE White Salmon, WA 98672 TEL: (509) 493-4938 FAX: (509) 493-4966
www.Aquaglide.com
24-26
IX. Storage
1.
Disassemble the Supersport™ following the assembly steps in re-
verse. NOTE: it is not necessary to remove the sailing harness from the
hull, or to remove the main sheet/ uphaul strap from the boom. These
items can be kept in place, making the next assembly easier.
2.
Before storing, make sure all parts are clean and completely dry.
Once
stored, any moisture in the product can encourage mildew, which
can
permanently stain, and ultimately damage the product.
3.
Remove the air from the hull by opening each valve and releasing air
pressure by pressing and twisting the valve stem. This allows the air to
escape freely without becoming trapped in the bladder.
4 Store the product out of direct sunlight and protected from the envi-
ronment in a clean, dry location. Do not store in a damp location. Do
not store at temperatures below freezing, as damage to the product may
occur.
5. Once disassembled, follow the steps below to pack the Supersport™
in the roller travel bag for storage or transport.
6.
Rolling the sail.
The Sport™ sail should be rolled up for storage.
Fold the top of the sail over the top batten and begin to roll the sail from
this point as shown in photo 6A below. Continue as shown in photo 6B
until the sail is completely rolled. Slip the rolled sail into the sail bag for
storage.
7.
Folding the hull.
Once
all the air is removed from
the hull, fold the hull in half
just behind the Mast Step as
shown in Photo 7 and 8.
8. Fold 1 complete
9. Fold 2 includes the stiff
Mast Step and Forward
Finbox. Fold toward the back
as shown in Photo 9.
10. Fold 3 is a repeat of the
previous step, folding again
toward the back of the boat.
Fold 4 is half-fold, bringing
the back of the boat over the
folds you have just com-
pleted. See Photo 10.
11. Last, place the folded
hull on top of the mast, boom,
sail and parts. Carefully zip
the bag closed and store in a
warm, dry location.
6-A
6-B
7
8
9
10
11
Fold 1 - Back Edge
of Mast Step
Fold 2 - Mast Step
and Finbox
Fold 3 -
Repeat
Fold 4 - Stern
Half Fold