Aquaglide, Inc. #1 North Shore Dr, SE White Salmon, WA 98672 TEL: (509) 493-4938 FAX: (509) 493-4966
for more info go to:
www.Aquaglide.net
23
Multisport
™
270 Owner’s Manual
2. Next, lead the opposite end of the rope through the eye splice as
shown in photo C2.
3. Pull the entire length of the tow rope through the eye splice and cinch
firmly.
When using the Multisport™ 270 as a kayak, only the hull and keels are
used. Paddle is not included. Multisport™ Kayak Kit is an optional ac
-
cessory. Detailed instructions on attaching the Kayak Kit are contained
in that package. The following steps outline the steps to be taken and
the points to note.
1. Same as the steps for preparing the hull in sailboat mode located on
page 6.
1. Remove the bridle straps from each side of the hull.
2. Remove the forestay webbing strap from the tow fitting.
3. Install BOTH keels in the hull. Secure using the keel retainer.
D. Assembly Complete - Now What?
A. Preparing the Hull
B. Points to Note
B-1
B-2
B-3
Keel Retainer
1.
IMPORTANT:
Before using the product, be sure to read and
understand the Warnings on page 4-5.
2.
IMPORTANT:
When moving the Multisport™ 270, always lift and
set it down. DO NOT DRAG, as this can damage the product before
you get started. It is helpful to have an assitant available for launch-
ing and moving the craft while on land.
VI. Assembly - Kayak
