2. Start the circulating pump. Use the adjusting knob to change the pump capacity so that there
is a continuous flow of water between the sump and the main tank (the recommended pump
capacity is approx. 60% of its maximum capacity). If the flow of water is accompanied by
excessive noise, adjust the rate of its flow from the tank and into the sump using the large valve
located on the plumbing of the draining unit above the sump.
3. Start the circulator pumps. Place the pumps in such a way that the water current they create
circulates through the entire aquarium.
4. Start the protein skimmer in accordance with its user manual.
5. Switch on the lighting unit in accordance with the respective user manual.
MAINTENANCE
The GLOSSY MARINE aquarium set does not require special maintenance. Regularly clean
the walls of the main tank and the sump (e.g. using a magnetic cleaner) and take care that the
plumbing components do not get clogged. Perform maintenance of the other devices following
the instructions contained in the respective user manuals.
DISASSEMBLY AND DISPOSAL
It is forbidden to dispose of used electric and electrical equipment in a trash
bin. Segregating
and proper utilization of this kind of waste leads to conserving the resources of natural
environment.
The user is responsible for delivering the used product to a specialized collection
point where it will be
accepted free of charge. You can obtain information about such a facility
at the local authorities at the product
seller.
WARRANTY CONDITIONS
The manufacturer grants a 24 month guarantee beginning on the date of purchase. The
guarantee covers defects arising from manufacturer fault i.e. defective materials or assembly
errors. It does not cover damage due to user’s fault caused by improper handling of the device
or using the device for purposes discordant its destination. Attention: any modification or
disassembly attempt exceeding normal usage and maintenance cause the guarantee void. In case
of noticing improper operation of the device send it with filled out warranty card to the
distributor address. The conformity of the production date stamped on the product and written
in the guarantee card is a prerequisite for accepting the guarantee. The following warranty
conditions do not exclude, limit or suspend user’s rights derived from discrepancy of the
