ALL TION INSTRUCTIO
INSTALLATION INSTRUCTIONS
Aquadart Inline Slider
Step.1
Step 1.1
Level the profile using a spirit level.Once you are happy that the profile sits on the tray
correctly mark the wall through the 3 pre-drilled screw holes in the wall profiles(no.3).
NOTE:
You may find it easier to mark and drill the wall if you apply masking tape to it first.
Step 1.2
Remove the wall profiles and drill the marked points using an 6mm masonry drill bit,
once this is done insert 3 × wall
plugs(no.6 ).
Step 1.3 Fix the wall profile (no.3) to wall using the screws ST4x30(no.15).
Place the wall profiles to the wall(roughly 20mm away from the front of the tray).(Diagram 1.1).
Step.1 Fix the wall profiles onto the wall.
Step 1.1
Step 1.1
Step 1.2
Step 1.3
20mm
NOTE:
you need to open the side panel packing to get the second wall profile.
