IMPORTANT - Missing Components
Please check this product for missing components prior to installation.
For spare parts visit www.aquadart.co.uk
IMPORTANT - Installation site
1. Ensure the top surface of the shower tray on which the enclosure will be installed is level in every direction.
2. The tiles or other wall finishing should be effectively sealed at tray edges.
3. Tiles should extend at least to the corner of the tray and a minimum of 1.9 meters from the top of the tray.
FIXING KIT COMPONENTS, SITE CONDITIONS
FIXING KIT
Wall Profile Cap
× 2
W all Plug
3 pcs
Screw
ST4x30
3 pcs
Glass Clip
x 4
Profile Clip
x 5
Handle × 1
Outside Handle × 1
Screw Cap × 2
W asher × 4
Countersunk Screw × 2
M5×16
Venturi Handle
Inside Handle × 1
Part 26-Screw Cap
for the rail end cap
x 4
level
Vertical Profile Cap
× 1
Screw
ST4x12
3 pcs
Part 22-Rail profile end cap
inside part x4
Part 23-Rail profile end cap
outside part x4
Bracket
x2
Screw M4x25
x4
Part 17
