FIX WALL BRACKET
K
8mm
M
N
J
O
Step
7.
Measure the support bar tube length then
cut
it
to
the
required
size (Diagram H).
Fit the support bar onto the glass panel, ensure the support bar is level then mark the wall fixing hole onto the wall (Diagram I).
Step
8.
L
1
Step
9.
Drill the hole onto the wall through the marked points using 6mm masonry drill bit then insert wall plug(Diagram J/K).
Secure the wall fixing onto the wall using ST 4 x 30 screw then fix the support bar onto the wall fixing (Diagram L/M).
Step
10.
Secure the glass clamp onto the glass using 2 M8 grub screws (Diagram N/O).
Step
11.
H
I
