FIX FRONT PANEL WALL PROFILE
Min
10mm
1
Step 1
Place the wall profile onto the edge of the tray roughly 10mm from the front of the shower tray
edge Ensure the wall profile is level to the wall If the panel is fitted without a tray, please ignore Diagram A
.
Mark the position for fixing the wall profile to the wall through the 4 pre drilled holes in the wall profile Diagram B
Step 2
Step 3
Drill the holes on the wall through the marked points with 6mm masonry drill bit then insert the wall plugs Diagram C/D
Step 4
Fix the wall profile to the wall with 4 ST 4x 30 screws Diagram E
C
B
A
D
E
6mm
