compound on self-tapping screws. The thread-locking
compound may damage the hull. IMPORTANT: Use thread-
locking compound on any fastener that is threaded into
metal or fastened with a nut. Vibration from the engine will
cause the screws to loosen if thread-locking compound is
not used.
• Avoid working over a deep pile carpet. If you drop a small
part or screw, it will be difficult to find.
• Place a mat or towel over your work surface. This will
prevent parts from rolling off and will protect the work
surface.
• Test fit all parts before attaching them permanently.
HELPFUL HINTS
4
Parts (Photographed)
1
2-56 Steering Linkage Rods
2
Fuel Tank
3
Fuel Tubing
4
Antenna Tube w/Cap
5
Throttle Cable & Housing
6
Quick Connectors
7
6-32 Mounting Bolts, 6-32 Threaded Inserts, #6 Washers
8
Nylon Quick-Links
9
On/Off Switch Cover
10 Steering Link Exits
11 Steering Link Seals
12 Throttle Housing & Antenna Tube Seals
13 Balloon
14 2-56 Clevises (for steering links)
15 Radio Box Lid Tape
16 Hook & Loop Material
Parts (Not Photographed)
Cowl
Hull
Radio Box
Drain Plug
Clevis Retainers (3)
Ride Pads (2)
4
5
1
2
12
8
9
16
10
11
13
14
15
3
Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they are of
acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly, contact Product
Support. When reporting defective or missing parts, use the part names exactly as they are written in the Kit Contents list.
Aquacraft Product Support:
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail:
KIT INSPECTION
6
7
Summary of Contents for Top Speed 2 HCAB5010
Page 20: ......
