4
OPERATION TIPS
Your Mini Alligator Tours is best suited for smaller bodies of water.
Also keep in mind that winds can overpower your Mini Alligator
Tours and cause you to lose control of the boat. Although this
boat has a smooth bottom and is capable of skimming over semi-
submerged obstacles, it is good to note that the boat could become
stuck on that debris, so be careful as you run your boat. NEVER
SWIM FOR A STALLED BOAT!
After you’re done running your boat for the day, be sure to unplug
the battery and remove it from the boat. Leave the cover off the
radio compartment overnight to allow any moisture to evaporate.
REPLACEMENT PARTS
To order replacement parts for the AquaCraft Mini Alligator Tours,
use the order numbers in the replacement parts list that follows.
Replacement parts can be purchased from your local hobby shop or
by mail order. If you need assistance locating a dealer to purchase
parts, visit
www.aquacraft.com
and click on “Where to buy”.
If you are missing parts, contact Hobbico Product Support at:
Phone: 217.398.8970
Fax: 217.398.7721
E-mail: [email protected]
AQUB1807
Check the steering direction to make sure when
the wheel is turned right or left the twin rudders
correspond in the proper direction.
Throttle Operation:
Fully Squeeze Trigger, hold one second, “BEEP”
Release Trigger, wait one second, “BEEP-BEEP”
(do not push forward)
Your boat is now ready to operate
REPLACEMENT PARTS:
AQUB6274
Prop
Cage
AQUB7752
Prop
Hub
AQUB7753
Propeller
AQUB7805
Linkage
Set
AQUB7904
Motor
Bracket
AQUB7905
Motor
Mount
AQUB8614
Radio Box Lid with Seal
AQUB8734
Rudders
AQUB8749
Rudder
Brackets
AQUG1061
380
Motor
AQUB9021
RX/ESC
2.4GHz
AQUP2552
7.2V
Battery
AQUM7050
Steering
Servo
AQUP9929
12V DC Quick Charger
TACJ0300
TTX300 Pistol Grip 3 channel Transmitter
OPTIONAL
DTXC2193
7.2V, 6-cell 1600mAh NiMH Battery
DTXP4210
DuraTrax Onyx 210 AC/DC Peak Charger w/LCD
DTXC2210
DuraTrax Adapter Std Plug
(required for the Onyx 210 charger)
