3
SETUP AND OPERATION
Plug the charger into a car power socket. The charger will start
beeping and the light will fl ash. Connect the battery pack to the
battery end of the charger. The charger will stop beeping and the
light will stop fl ashing. You will know charging is complete when
the charger starts to beep again and the light begins to fl ash.
Install four “AA” batteries into the bottom of the transmitter.
Lift the rear edge of the seat compartment and rotate
the radio box cover up. Place it to the side.
Place the charged battery into the open compartment and
plug the battery into the boat. You will hear a faint “BEEP.”
Turn the transmitter on, making sure the power light is glowing.
Remove and place the hook and loop to
the bottom of the battery pack.
