21
ENT
Profile: 000
Profile Setup
Profile: 001
0
0
Key in Profile no.
ENT
Profile: 1
ID1: 0000
1
3
2
6
Key in Device ID
Profile: 1
ID1: 1326
ENT
Profile Setup
Repeat for other ID’s
1
7.2 Record the unique ID of each Basic II probe PRO II.
1.
Although the ID’s/serial numbers are all 5 digits long, the 1
st
digit is always set
to ‘5’.
2.
When programming the Logger, always programme the ID’s of the RF
STUBS/PRO’s omitting the first digit(5). For Example: With the serial Number
or ID being SN:51204, when programming the ID into the Logger, program
the ID as 1204 omitting the ‘5’.
7.3 Program the ID’s into the Logger
1.
All of the recorded ID’s of the BASIC II probes and PRO II’s installed and
recorded in the previous section, should be programmed into a profile, that
upon downloading, the logger will automatically download all the latest data
from the ID in the profile. This is called a Profile Log.
2.
The Logger has a capacity for up 120 profiles.
Should one need to download all of the stored logs stored on a the BASIC II probes
or PRO II, then download all the data by means of a single log. The Logger has a
battery backed real time clock. During each download, the time is automatically
synchronised with the BASIC II probes and PRO II’s.
Once the logger
is turned on,
Press the
Menu/
key.
Press the
Menu/
key until
the ‘Group Setup’
menu is
displayed. Follow
the steps in the
diagram on the
left to program in
the device ID’s.
Repeat until all of
the groups are
programmed into
the logger
