8 - Preparation for operation and charging
1.
Place the unit on a dry flat surface.
2.
Insert the USB-C plug of the power supply and charging unit into
the socket. Before first use, the battery must be fully charged.
3.
The LED starts flashing red.
4.
Before first use, fill the glass container with max. 60o C warm
water and let it stand for at least 2 hours to moisten the
membrane cell completely. Finally, renew the water and shake
for about one minute.
5.
Then you can fill in the water that you want to enrich with
hydrogen and drink
. You should only fill in so much water that
the water level does not touch the pressure cap, so that no water
penetrates there.
6.
At the end of the charging process, the LED lights up
permanently green.
7.
Remove the plug from the mains and charging part and close
the tab.
The generator must not be operated during the first
charging.
8.
If the LED starts flashing during operation, the mains and
charging unit must be reconnected until the battery is charged.
1
ok
2-3 hrs.
2
It is normal for there to be some water/moisture in the
production tank when the unit is delivered, as the
membrane between the electrodes should always be
kept moist.
Summary of Contents for AquaVolta NANO
Page 12: ......
