Page - 1
SECTION 1 - GENERAL INFORMATION
1.1 Contacting AquaCal AutoPilot
Please have your model and serial numbers available when contacting your local authorized service partner
for questions, service, or parts. Contact AquaCal AutoPilot for a service partner in your area.
Web
www.AquaCal.com
Phone
(1) 727-823-5642
Hours
8-5 pm, Eastern M-F
Table 1 - Contacts
1.2 Additional Information
Please go online at www.AquaCal.com for additional information
regarding your equipment including:
l
Maintenance Instructions (including winterizing)
l
Equipment Specifications
l
Additional Troubleshooting
SECTION 2 - OPERATION
2.1 Control Panel
Figure 1 - Control Panel
The following information outlines the operation for a standard installation.
Control Buttons will operate differently for custom installations; such as a
heat pump connected to an external controller.
2.1.a Indicator Lights
Indicator
Description
“Pool”
Heat Pump is referencing the pool thermostat.
“Spa”
Heat Pump is referencing the spa thermostat.
“Cooling”
Indicates unit is cooling water.
Please note - the compressor must be operating before
this light will illuminate.
“Desired Temp”
Indicates temperature set point is displayed. This is
displayed when “UP” or “DOWN” is selected.
“Water Temp”
Indicates current water temperature.
“Heating”
Indicates unit is heating the water.
Please note - the compressor must be operating before
this light will illuminate.
Table 2 - Indicator Lights
