Aquabot PURA SERIES, Product Settings And Troubleshooting Manual, Page: 6 / 8

ON / OFF
setting the poWer supplY
to eXternAl tiMer Mode
In order to use an external timer with the power supply, please make sure
that the timer is plugged into the GFCI outlet. Then plug the power supply
into the timer and then the floating cable into the power supply socket.
Once this is complete, execute the following:
Press and release the ON/OFF to turn ON the
Power Supply.
Then select Large Pool or Small Pool.
Lastly, press and release the External Timer
Button.
The LED for your selected mode will start to
blink continuously.
The Power Supply is now in External Timer
Mode and ready to be used via your timer.
To exit this mode, press and then release
External Timer Button. The Power Supply will
be switched back into its previous mode.
1 2 3