background image

EXTEND THE LIFE OF YOUR CLEANER

Your pool cleaner does a lot of work behind the scenes during the season.  To help you get the most out of your product, we’ve listed some important 
tips on how to extend the life of your pool cleaning investment.  Take care of your robot and it’ll take care of you.

TIP #1: DO NOT DROP THE UNIT OR POWER SUPPLY!

Dropping your cleaner or power supply will cause damage and 
your robot will not work properly.

TIP #2: CLEAN THE FILTER BAGS!

Make sure to clean your robot’s filter bags or baskets!  Cleaning 
these keeps your robot running smoothly, quickly, prevents 
clogging, and keeps re-circulated water crystal clear!  

“My robot isn’t picking up debris...”

 - Clean. The. Filter.

TIP #4: GIVE IT A RINSE

After use, remove your Aquabot from the pool and rinse the 
outside AND inside thoroughly.  Doing so will help prolong the 
life of the product by rinsing off any pool water that probably 
contains chlorine.  Rinse off its internal components as well.

Note: It is recommended to leave the cleaner in the pool for 20 

minutes after each cycle to let the motor cool down properly.

TIP #5: STORAGE WHEN NOT IN USE

DO NOT leave your cleaner in the pool when not in use!  Store it and the power supply 
in a dry / shaded area.  Coiling the floating cable underneath the cleaner helps keep 
the integrity of the cable.  A shaded area prevents any prolonged exposure to the hot 
summer heat.  Removing the cleaner from the water prevents any over-exposure to 
pool water during the swimming season.  Even whales come up for air once in a while, 
so should your pool cleaner.  If storing your cleaner in a box, make sure cleaner is dry.

During the winter months it is important to make sure your cleaner is completely dry 
and kept at proper storage temperatures ranging from 

10ºC – 40ºC (50ºF – 104ºF)

This will keep the motors, plastics and seals protected.

TIP #3: POOL COVERAGE / PREVENT CABLE TANGLING

Your cleaner is equipped with an adjustable pin / axle  option.  
Adjust it in the opposite direction after every cleaning cycle.  
This will ensure your cleaner reaches all areas of the pool and it 
really helps to prevent cable tangling.  

“My cable keeps getting 

tangled...”

  - Adjust the pins / axle configuration.

Summary of Contents for Pura 4X









Reviews: