background image

HOW TO...

ENSURE POOL COVERAGE & PREVENT CABLE TANGLING

RETRIEVE CLEANER FROM POOL

CABLE DETANGLER

(Select Products)

Axle

Position

Axle

Position

Axle

Position

Axle

Position

To change the angle and direction of the cleaning path 
simply alternate the pins located underneath the bottom 
of the cleaner.  We recommend to change the direction 
every cleaning cycle to ensure the cleaner is covering the 
whole pool as well as to prevent cable tangling.

Should your cleaner have a Swivel:

Grab cable between the cleaner

and swivel.  DO NOT grab swivel

GENTLY

 pull the cable 

and bring the cleaner 
toward you.

Lift cleaner by using the handle attached 

to the cleaner. 

DO NOT lift cleaner by the cable.

Fixed Pin

Adjustable Pin

1

2

3

CLEAN THE FILTERS

1

ALL MODELS

Push tabs down and 

outward. This will remove 

the cover and expose the 

filter *bags.(*Select models 

have baskets)

2

FILTER BAG MODELS

Remove filter bags from 

inside cleaner by gently 

pulling on the elastic band 

around the suction ports.  

Turn bag inside out.

3

FILTER BAG MODELS

Pull tabs to undo Velcro® 

and turn the filter bag inside 

out to ensure a

thorough cleaning.

2a

FILTER BASKET MODELS

Press in tab on side of

basket to expose the inside 

of the compartment.

4

ALL MODELS

Use a garden hose to clean 

filter bag / basket. 

We recommend cleaning

the filter bags after

every cleaning cycle.

The Detangler is a feature that will help untangle the floating cable should 

this occur.  This feature should be used outside of the pool.  

Make sure that 

the floating cable is disconnected from the power supply!

 Now grab the 

large part of the grip on the floating cable. Using one hand, pull towards 

the direction that is between you and the power supply and walk  away from 

the cleaner.  As you move further from the cleaner, the floating cable will 

untangle itself and straighten out.

If your product does not have a Detangler, please refer to 

Troubleshooting 

Section

 labeled “Floating Cable is Coiled Up” on back of this manual.

Direction of Power Supply

Direction of Cleaner

To avoid a possible electrical shock, do not use this product if the floating 

cable appears to be damaged.

Summary of Contents for Pura 4X









Reviews: