Installation Instructions:
110-1 Wireless Charger
Parts
Provided
Wireless Charger
Alcohol Wipe
2.5” Hole Saw
Electric Drill
Installation Guide
Step 1: Drill or Cut 2.5” hole
Tools
Required
Step 2: Use provided alcohol wipe to clean application
surface. Remove adhesive backing from the wireless
charger and insert the charger into hole
Step 3: Using a 2A fuse, attach wires to a 12/24V power
supply and ensure there is a waterproof connection
Step 4: Make sure the charger was installed correctly by
placing a wireless charging compatible device in the center
of the charger. Check that the device is charging a few
seconds after it is placed.
Contact:
1108 Eldridge St, Clearwater, FL 33755
For further information visit www.aquaamp.com
Input Voltage Range
Technical Information
10-30V DC
(12 / 24V system)
Input Current Max
Output Power
Standby current Draw
Waterproof rating
Certifications
2A
10W (9V, 1.1A)
< 0.1W
IPx6 front and back
Qi, CE, FCC, ROHS,
UNECE R10 E24, RCM
