background image

3. 

Safety instruction

ATTENTION! To avoid injuries, property damage and harm user's health, third parties as well,  a user

ought to  get knowing  with  present instruction before  installation and use  of the dispenser.  Failure to

comply   with    the   requirements  of   the   instruction  may  result   in  property   damage  and   harm  user's

health, third parties.

This device dispenses water at a very high temperature  (with the heating function)!!! 

At the using of the dispenser it is necessary to follow basic precautionary actions that include:

1.

Before using  the device must  be mounted  correctly and installed  in accordance with the  present

instruction.

2.

Installation of the device is possible only on solid, flat, horizontal surface.

3.

 Do not keep the device in the confined space. Moving the device from one place to another, do not

hold onto the taps. 

4.

4. Place the dispenser not closer than 20 cm far from a wall and ensure free air flow between a wall

and the device. 

5.

5. Use the device only with properly grounded outlet.

6.

6. Do not use extension cords.

7.

7. Always, during removing the cord from an outlet, grab the plastic base of the plug. Never yank on

the power cord. The plug of the power cord must be easily accessible after device installation.

8.

8. Do not use the device, if the power cord is frayed or has another damage. In case of a damage of

the power cord it must be changed by the manufacturer, its service agent or another qualified person.

It is prohibited to use the device with damaged power cord. 

9.

9. Beware of electric current, do not wet the cord, plug or other parts of the cooler in water or other

liquid. 

10. Before cleaning the device make sure it is unplugged.

11.

Do not leave the children near the dispenser with hot water without proper and direct supervision. 

Turn off the power to the cooler in case of possible uncontrolled use by children. The device can be

used   by   children   aged   8   years   and   older   and   persons   with   limited   physical,   sensory   or   mental

abilities, or in the absence of experience and knowledge, if they are under the control of the person

responsible for their safety, or have been instructed about the safe use of the device and realize the

dangers. Children must not play with the device. Cleaning and service must not be carried out by

children without supervision. 

12. Service must be carried out by only a certified technician.

13.

Warning: do not damage the refrigerant circuits (in devices with compressor cooling).

14. Cleaning and technical service must be carried out by only a certified technician. Access to service

areas is permitted only for persons having necessary knowledge and experience.

15.

The device must be used at an ambient temperature from + 5°C to + 43°C. and an air humidity of not

more than 85%. 

16. The dispenser is not intended to installation out of rooms or in a room where water can get on the

device

17.

The themostat has been already adjusted. There is no need to try to adjust it on your own.

(devices with compressor cooling). 

Summary of Contents for YLR-TB-15















Reviews: