Aqua Vac Systems Mako Shark 2, Owner'S Manual

Page: 10 / 16

PREVENTATIVE MAINTENANCE
In order to maximize efficiency and receive long term service of your unit, we suggest the
following:
• Thoroughly rinse entire unit after use.
• Clean filters thoroughly after each use—a clogged filter can decrease efficiency dra-
matically.
• Remove any twists in the cord after each use. Twisting should be minimal if the unit is
functioning properly. Stretching cord in sunlight is helpful.
• Avoid allowing the unit to “cool down” in the water.
• Inspect belts and filter frequently. Replace when necessary.
• Always keep your Sensor Bar level (a non-level Sensor Bar can cause the cord to twist).
Protect Your Investment!
Following these quick and easy steps will extend the life and efficiency of your MakoShark 2.
If you have any questions, contact your local Service Center or call us at 1-800-327-0141,
Monday - Friday, 8:30 a.m. - 5:30 p.m. EST.
PARTS ORDERING INSTRUCTIONS
Should you desire to order repair parts, follow this simple procedure:
1. Determine each of the parts you will need and identify them by part number. Use this book
as a guide, be sure to note that in some cases, due to continual product improvement, parts
may vary depending on the year of manufacture.
2. Contact your local Factory Authorized Service Center with the list of parts you will need.
Be sure to advise the Service Center of the MakoShark 2 serial number and the date of pur-
chase. If you need the location of your nearest Service Center, please call Aqua Vac
Systems, 1-800-327-0141 or 561-688-0211.
3. All parts under unconditional warranty are confined to the specific limitations as stated.
8