© 2019 New Aqua LLC dba Aqua Systems • 114 Vista Park Way • Avon IN 46123
10
Eradicator Gen II O
3
Owners Manual Supplement
Ozone Specific Information
Start Up
Plug the power supply into the receptacle. Refer to the main Eradicator manual for the instructions
for the start up procedure.
The programming for the O
3
is already done for Eradicator O
3
systems, so no further action is
needed beyond the normal start up procedure.
Once set up is complete, start the Eradicator in a manual regeneration and let it complete the
regeneration.
The Eradicator with Ozone should only be installed, serviced, and programming accessed
by qualified technicians.
It is highly recommended to have an annual inspection and maintenance on the Eradicator system
to keep it operating at optimum performance.
If any service or maintenance is required, contact your authorized dealer for this service.
Gen II O
3
with Ozone
If the Eradicator O
3
is installed in any damp or humid area, it is highly recommended to
to install the optional Air Dryer kit to the system to dry the air entering the O
3
generator.
This allows the generator to produce the optimum quantity and quality of ozone to enhance
the Eradicator's performance and reduces required maintenance on the ozone producing
components. The optional dryer mounts on the left backside of the valve controller.
Simply contact your authorized Eradicator dealer to obtain and install the dryer kit.
Note:
Summary of Contents for Eradicator Gen II
Page 12: ...Revision 2 1 12 2019...
