Download the App “Aqua-Scope” from your App store and register yourself as new account with email
and password. You may want to use the QR codes above for a convenient access to your mobile app
store. Follow the instructions on the app.
If you don’t want to use the Aqua-Scope Mobile App or if you want to integrate the device into your own
monitoring system you can also setup and operate the device using any standard web browser. Please
refer to the Aqua-Scope Developers Manual for more information, available at
Functions and Usage
Every 15 minutes (when mains powered) or every hour (when battery operated) the device reports the
following sensor values:
Pressure of the water,
Temperature of the water right at the sensor head.
The sensor values can be accessed in the Aqua-Scope App or they are reported into the network when
integrated into third party systems. The device offers a low watermark and a high watermark threshold
that can be defined using the mobile app. If the valued are exceeded an under pressure or overpressure
alarm is issued.
Beside the water-related alarms the device also reports certain device-related conditions as alarm:
No external sensor head connected
Head present but no contact to water
Battery Low
Mains Power lost
Bad communication network quality
All these alarm conditions are monitored continuously. Alarms are indicated on the device with red LED
and buzzer sound (both can be disabled in the app) and they are reported into the Aqua-Scope Cloud
and shown in the Aqua-Scop App. If the alarm condition disappears the alarm is reversed but will remain
Users and Installation Manual: Water Pressure Sensor (PREWIE02)
Copyright © 2022 Aqua-Scope Technologies, Sakala tn 7-2, 10141 Tallinn, Estonia, www.aqua-scope.com