Set Up Instructions
1. Remove the
Filter Unit
and
Light Unit
from
the aquarium Body.
2. Take the
Lid
of the
Filter Unit
off.
3. Remove the
Spray Bar
,
Power Head
and all
filter media.
4. Turn the
Filter Unit
over and slide the
Power
Head
into the bottom of it. Fig 1 Note: This may
be a tight fit.
5. Take the
Filter Unit
and all filter media to the
sink. Ensure there is no detergent residue in or
around the sink.
6. Open the
Ceramic Noodles
and
Carbon
.
(See Tips)
7. Empty the
Ceramic Noodles
into one
Filter
Tray
. Place the
Carbon
bag into the other. Fig
2
8. Run tap water thought them to remove any
dust.
DO NOT WASH IN SOAP OR DETER-
GENT
.
9. Rinse the
Wool Pad
and place them on top
of the
Ceramic Noodles
and
Carbon Bags.
Fig 3
10. Rinse the
Black Sponges
and place them on
top of the
Wool Pads
. Fig 4
11. Connect the
Spray Bars
into the white
T
at the
top of
Outlet,
the holes of the spray bar must point
down.
12. Insert the complete
Spray Bar
Unit into the top
of the
Power Head
, press down firmly ensure it is
a tight fit. Fig 5
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5