aqua metro CALEC ST II, Installation And Operation Manual, Page: 93 / 144

93
CALEC
®
ST II
2 analogue outputs
Output signal 4...20 mA or 0...20 mA
Supply voltage 6...24 V DC
Electrical isolation max. 48 V DC
Max. resistance ≤ 837 ohms at 24 V DC, 0 ohms at 6 V
Max. transformer error 0.15% of measured value + 0.15% of end value
Option N2Open Factory settings
Physical layer RS 485 / address: 1
and address
Baud rate
9600
Option BACnet MS/TP Factory settings
Physical layer and RS 485 / ID: 431
AMT ID
BACnet device profile
B - ASC / the last 5 digits of the serial number
and instance
BACnet MAC address
The last 2 digits of the serial number
Baud rate and mode Automatic / master
Option LON Interface Factory settings
Type LON TP-FT 10 free topology (2-wire twisted pair),
certified in accordance with LONMARK
®
3.4
Baud rate 78 kBaud
Maximum bus length 500 m / 2700 m with/without termination resistors,
64 nodes per segment