7
1.
Thread
2.
Rubber sealing
3.
Slide ring
4.
Nut
There is a blue fitting in the mounted bend of the return line. Here, air is sucked in when the pump in the cabinet
fails. This prevents the formation of communicating pipes and an overflow of the filter tank by returning water.
When starting the aquarium, water has to be filled in until the filter tank is filled up to 10 – 12 cm in the front
part and then the pump has to be started. If the water level in the filter tank decreases, water has to be filled in
until the a.-m. maximum is reached. Take care that enough space is left so that the inflowing water in case of
failure or shutdown of the circulation pump still fits into the filter tank.
4.
Skimmer EVO 500
See separate manual. The skimmer is hooked to the rear wall of the filter sump with the holding unit without
screws (refer to Fig. 1).
5.
Illumination
LED Illumination Qube (see separate manual)
Both Qubes are screwed on the rear panel
with the supplied bracket
.
6.
Operating the aquarium
For operating the
Cubicus CF Qube
, we recommend our
Reef Life
series as accessories:
Reef Life
Calcium
supplies corals with essential calcium and trace elements.
Reef Life
Iodine
is essential for the care of many corals.
If both additives are applied combined and regularly, they guarantee for successful salt-water aquarist.
We recommend to prepare your sea water with osmosis water in order to minimize from the beginning algae
problems by silicic acids, phosphates and nitrates. Sea-salt of Aqua Medic is formulated from highly purified
compounds. In this way, both products will support you to keep the content of the above-mentioned substances
as low as possible.
The fixing of rocks and corals can easily be done with the underwater adhesive
Reef Construct.
7.
Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the product. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear. The original invoice
or receipt is required as proof of purchase. During the warranty period, we will repair the product for free by
installing new or renewed parts. This warranty only covers material and processing faults that occur when used
as intended. It does not apply to damage caused by transport, improper handling, incorrect installation,
negligence, interference or repairs made by unauthorized persons.
In case of a fault with the unit during or
after the warranty period, please contact your dealer. All further steps are clarified between the
dealer and AB Aqua Medic. All complaints and returns that are not sent to us via specialist dealers
cannot be processed.
AB Aqua Medic is not liable for consequential damages resulting from the use of any of
our products.
AB Aqua Medic GmbH -
Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 01/2022/v8
