15
The programmes in DimEdit can be opened either by one double click of the left mouse
button or by one click and a second click on the button „opening“.
Copy DimEdit as well as the associated programmes for the light control of the CD provided into a
file on the hard disk of your computer. The programme can be started without further installation.
By the button „loading“ the light programmes included in delivery (Fig. 5) can be opened. By
clicking and holding the left mouse button, curves can be created. Times and percentages are
indicated in the lower, light blue bar. The programme is divided in white, blue, clouds and moon.
With 100%, maximum brightness is shown. During cloud flying, 100% would be the maximum
possible cloud darkening. With the controller for cloud’s speed it can be adjusted how often the
random generator builds new cloud formations.
Description of the programmes (Fig. 3):
Programme 0:
White starts at 7:30 o’clock with brightness of 32%, reaches 100% at 8:00 o’clock, is dimmed
down at 18:15 o’clock in order to end at 18.45 o’clock. Blue starts at 6:45 o’clock and ends at
19:15 o’clock, the dimming process is the same as with white. No moonlight and no moon phase.
Programme 1:
Same as programme 0, but other times of start and end than with the blue light.
Programme 2:
Corresponds to programme 1 that was complemented by a moonlight shining constantly with 5%
power during the dark phase.
Programme 3:
Same as programme 2 but with 10% moonlight.
Programme 4:
Same as programme 3, but instead of constant moonlight a moon phase with 5%.
Programme 5:
Same as programme 3, but instead of constant moonlight a moon phase with 10%.
Programme 6:
Same as programme 2, plus cloud flying between 10:30 and 16:00 o’clock with 12 to 40% cloud
darkening.
Programme 7:
Same as programme 6, but with 5% moonlight.
Programme 8:
Same as programme 7, but with a moon phase of 5% (see Fig. 4).
Programme 9:
Without programming.
If there should be full moon on a certain day, this can only be adjusted at the clock (see chapter
4.2.1).
The programs can be changed by loading them with DimEdit, modify and then store them under
the same or a new name.