Safety Information Reef Photon
Important
Please Read Carefully
• Always isolate the power supply unit (PSU) from the mains electricity before installing
or carrying out any maintenance to the lamp unit.
• Never look directly at an illuminated LED lamp.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
•
Caution:
Do not use any other PSU with this lamp unit as the light unit may not work and this may
cause irreparable damage to the lamp unit. If the PSU supplied with the unit needs to be replaced
then please obtain an authentic Reef Photon PSU supplied by TMC.
•
Caution:
Do not bundle multiple PSUs together.
•
Caution:
The PSU is not waterproof and therefore must not be mounted above the aquarium
or in any position where it may accidentally fall into water or be splashed by water.
•
Caution:
Do not position or operate the Reef Photon light unit or PSU in a confined, dusty or
unventilated space, or where there is an additional heat source.
• Keep out of direct sunlight.
•
Caution:
Do not obstruct the cooling fans or install in a closed hood. Ventilation must be provided
to ensure the light unit does not overheat.
•
Caution:
Do not operate this appliance if any part of it has a damaged cord or plug, is malfunctioning,
or has been dropped, immersed in water or damaged in any way. If the external cord of this unit is
damaged, it should be replaced by a cord exclusively available from the manufacturer or his service agent.
• This unit is designed to be used indoors and is not suitable for any outdoor applications.
•
Caution:
Ensure the light unit is securely installed above the tank before operating.
•
Caution:
The Reef Photon light unit must be installed no less than 70mm from the water surface.
•
Caution:
DO NOT SUBMERGE the Reef Photon light unit. If the unit is submerged, the light unit
guarantee will be invalidated.
•
Caution:
Always leave a drip-loop in the cable to the light unit to prevent water running down
the cable and reaching the PSU.
• If the light unit overheats it will automatically cut off. If the temperature is too high,
and the fan does not operate, switch off the power and unplug from electricity supply.
Then contact your local retailer or TMC customer service.
• Dispose of this unit responsibly. Check with your local authority for disposal information.
Troubleshooting
1. The light does not come on
•
Check that the PSU is properly connected and power is turned on.
•
Adjust light intensity using the app in case you have inadvertently set it at a very dim lighting level.
•
If still not working, please contact your retailer.
2. Fan not running or lamp overheating
•
Check the app to check the light temperature.
It is normal for the fan to only run at temperatures above 38°C (100°F).
•
If the app is showing a very high temperature e.g 60°C (140°F),
this indicates there is a problem so please contact TMC customer service.
•
If the light has been running for more than 15 minutes, and the app shows a temperature below 30°C (86°F),
please contact TMC customer service.
3. Lights turn on/off when not set to do so
•
Please check if on/off times have been properly set in the app. Under the “Advanced” mode,
all channels should be 0% for the first (light on) and the last (light off) time.
Make sure to upload to light after times have been set.
•
Uninstall the app then reinstall. Reset, and see if all working as required the following day.
•
If all above are failed, please contact your retailer.
4. Partly LED not working
•
Check the APP if it runs under the mode with partly LED.
Some channels or schedules are running with partly LED.
•
If still not working correctly, please contact your retailer.
5. Unable to connect to app
•
Please check that your smartphone or other compatible device has Bluetooth switched on.
•
Switch off power, disconnect the power cable then reconnect and switch back on.
Wait 3 minutes then try again to connect to app.
Please note:
connection signal strength is subject to the Bluetooth chip used in different
brands and models of smartphones).
•
If still not working, please contact your retailer.
Optimum
aquarium size
Adjustable channels
1 Natural daylight 6500k
2 Fiji Blue 445nm
3 Reef Blue 470nm
4 Sea green 450 + 505nm
5 NUV 400 + 420nm
6 Colour rendition enhancer
660nm + 4000k + 6500k
Weight
300g
Max LED Power
84w
Total Power Consumption
72w
Total Luminous Flux
3283
Power
100-240v 50-60Hz
Dimensions
109x109x50mm
50 x 50 x 50cm
Reef Photon
Example usage:
Peak PAR value for a 60 x 45cm/24"x18"
aquarium at 50cm/20" from water surface
is measured at 151ppfd. PAR value contains
light reflection inside the aquarium. The
Reef Photon provides amazing
uniform coverage!
